Programmable Timer

Display

a. 4 Digit 0.56 Red 7 segment LED display

b. 4 Red LEDs to indicate selected timing range

c. Red LED to indicate current status of Relay On/Off

Modes

: User settable from front panel

  a. Power On start

  b. Press to start (with battery backup selection using EEPROM)

  c. Cyclic action

Number of Cycles

: 1-99 cycles settable for cyclic mode after which the timer stops

  Setting number of cycles to Zero disables number of cycles setting

Reset/Start

: Front Reset/Start switch with parallel terminals at rear to connect

  additional switch, if required.

Relay logic 

: Settable delayed On/Off,   5 Amps/220V AC Dual Relay Contact 

  outputs

Timing direction

: Up/Down time counting user settable

Memory

: Non-volatile EEPROM to save settings 

Configuration Lock

: Open terminals 1&2 to lock all configuration except Set Limits

Supply

: 220V AC 15% @ 50/60Hz

Dimensions  

: Front Facia: 96mmx96mmx135mm    Cut Out: 91mmx91mm

Weight

: 800 grams